Lifts rarely stop dead out of nowhere. Nearly every breakdown we attend was giving off signs for weeks, and somebody either did not notice or did not know what they were looking at.
Here is what to watch for, and roughly what each one means.
Doors that hesitate, judder or reopen
By some distance the most common fault we are called to. If the doors are slow to close, bounce back for no reason, or need a shove, that is usually worn door gear, a dirty or misaligned detector edge, or debris in the track.
It is also the cheapest thing on this list to put right, and the most expensive to ignore, because door faults are what strand people.
A step up or down at the landing
If the car stops slightly above or below the floor, that is a levelling fault. On a hydraulic lift it is often oil temperature or a tired valve. On a traction lift it is usually the brake, the encoder or ropes that have stretched.
Beyond being a trip hazard, it is a compliance problem. It will be written up at the next thorough examination.
Noises that are new
Every lift has its own sound and the people in the building know it. What matters is change. A new grinding, knocking or squealing usually points at guide shoes, bearings or a worn sheave.
Rough or shaky travel is the same story. It is nearly always fixable, and it is what your building’s users judge the lift on.
Tripping out and needing a reset
A lift that keeps needing to be reset is telling you something. It might be overload, a thermal cut-out, a failing contactor or an intermittent safety circuit.
Resetting it clears the symptom and leaves the cause. Intermittent faults need diagnosing properly, which is much cheaper over a year.
Longer waits than there used to be
If the lift is taking noticeably longer to arrive, something in the controller, drive or door timing has drifted. On its own it is an irritation. It is also often the first sign of something else on its way.
Call outs that keep repeating
If you are ringing somebody out three or four times a year for the same problem on the same lift, the lift is probably not the problem. The service pattern is.
Almost everything above is visible on a planned maintenance visit while it is still an adjustment rather than a failure. That is the whole argument for a maintenance contract, and it usually costs less than the call outs it replaces.
If it is doing any of these
Ring us on 0800 999 1042 and describe it, or see how our lift repairs work. We can normally tell you roughly what we are coming to before we set off, and if somebody is trapped in the lift, say so straight away: that is an emergency call out. Entrapments go to the front of the queue regardless of the hour.